SINGLE SERPENTINE WATER HEATER
It provides both economical and hygienic domestic hot water supply with the heat energy it receives from a single heat source (steam boiler, hot water boiler, solar energy panels, geothermal energy, heat pump, etc.).
There are 2 inputs on it so that a thermometer and thermostat can be fitted.
- Hygienic, due to the coating, Surfaces in contact with water are double enameled
- 50 mm thick polyurethane insulation from 100 liters to 600 liters, special sponge insulation from 800 liters to 6000 liters,
- Electrostatic powder painted cover on galvanized sheet from 100 liters to 600 liters,
- Special winlex cover from 800 liters to 6000 liters,
- Cathodic protection,
- High efficiency,
- Optionally, electrical resistance,
- Aesthetic appearance
- 10 bar operating pressure
- According to European standards (EN 12897)
DOUBLE SERPENTINE WATER HEATER
Double serpentine water heater are used where there are two heat sources (solar energy, boiler etc.). It is connected to the solar energy collector and the boiler. Heating is primarily carried out by solar energy collector, in cases where the temperature does not reach the set level, the boiler line is automatically activated. There are 2 inputs on it so that a thermometer and thermostat can be fitted.
- Capacity from 100 liters to 6000 liters
- Hygienic, due to the coating, Surfaces in contact with water are double enameled
- 50 mm thick polyurethane insulation from 100 liters to 600 liters, special sponge insulation from 800 liters to 6000 liters,
- Electrostatic powder painted cover on galvanized sheet from 100 liters to 600 liters,
- Special winlex cover from 800 liters to 6000 liters,
- Cathodic protection,
- High efficiency,
- Optionally, electrical resistance,
- Aesthetic appearance
- 10 bar operating pressure
- According to European standards (EN 12897)
ELECTRICAL WATER HEATER
It is a type of water heater that works with electrical energy where there is no hot water source eg. heat pump, steam boiler, solar collector, hot water boiler etc.
Similar to serpentine heaters, enamel coating is used for hygien in electrical water heaters.
Electrical water heaters offer an effective and safe heating solution with fuse, safety, operating thermostat, switches and residual current relay in electrical panels.
- Capacity from 100 liters to 6000 liters
- Hygienic, due to the coating, Surfaces in contact with water are double enameled
- 50 mm thick polyurethane insulation from 100 liters to 600 liters, special sponge insulation from 800 liters to 6000 liters,
- Electrostatic powder painted cover on galvanized sheet from 100 liters to 600 liters, Special winlex cover from 800 liters to 6000 liters,
- Cathodic protection,
- High efficiency,
- Stainless resistances
- Aesthetic appearance
- 10 bar operating pressure
This post is also available in:
Türkçe (Turkish)