Gasketed Plate Heat Exchangers - Maxwor I Mechanical & Thermal Solutions

Maxwor Gasketed Plate Heat Exchangers (GPHE) are equipment that enables heat transfer with maximum efficiency by using each point of the plate surface thanks to their special plate design. It can be easily to service and maintain due compact structure.

GASKETED PLATE HEAT EXCHANGERS WORKING PRINCIPLE

The working principle of the heat exchanger is to transfer the heat of the fluid with a high temperature to the other fluid at low temperature that is in contact with the other surface of the plate. Thus, the hot fluid starts to cool by transferring its energy, the cold fluid starts to heat up and heat transfer takes place. Both fluids are directed with the help of gaskets, preventing them from mixing with each other.

OUR MODELS

PHE MODELS		DN25	DN32	DN50				DN65	DN80		DN100
PHE MODELS		B4	B5	B7	BT8	BM8	B8	B9	B10	BN10	B12	BM12
Max Flow Rate	m3/h	15	19	63				80	110	110	240
Plate Corrugation Angle		HT / LT	HT / LT	HT / LT	HT / LT	HT / LT	HT / LT	HT / LT	HT / LT	HT / LT	HT / LT	HT / LT
Vertical Port Distance	mm	50	59,5	100	203	140	140	150	225	238	225	221
Horizontal Port Distance	mm	298	357	553	380	1036	640	800	719	1070	719	1338
Width (min - max)	mm	250-500	250-750	250-1000				250-1250	250-1500		250-2000
Design Pressure (min max)	bar	-1 / 25	-1 / 25	-1 / 25	-1 / 25	-1 / 25	-1 / 25	-1 / 25	-1 / 25	-1 / 25	-1 / 25	-1 / 25

PHE MODELS		DN150	DN200			DN250	DN300	DN500
PHE MODELS		B17	BU22	BT22	B24	BV25	B30	B40A
Max Flow Rate	m3/h	380	800
Plate Corrugation Angle		HT / LT	HT / LT	HT / LT	HT / LT	HT / LT	HT / LT	HT / LT
Vertical Port Distance	mm	298	353	363	395	439	480	672
Horizontal Port Distance	mm	1294	1479	698,5	1489	1939	2120	1822
Width (min - max)	mm	1000-2500	1000-4000			1250-5000	1250-5000	1250-5000
Design Pressure (min max)	bar	-1 / 25	-1 / 25	-1 / 25	-1 / 25	-1 / 25	-1 / 25	-1 / 25

GASKETED PLATE HEAT EXCHANGERS FEATURES

GASKETED PLATE HEAT EXCHANGERS FEATURES

Technical Datas (Depending on design)
Capacity	1 KW	-	30 MW
Flow Rate	5m³/h	-	4500m³/h
Connection Diameter	DN25	-	DN500
Operating Temperature	-30°C	-	+180°C
Working Pressure	-1 Bar	-	25 Bar

ACCESSORIES

Insulation, interior filters, necked flange, thermometer, manometer, reverse washing system can also be provided on customer's request.

GASKETED PLATE HEAT EXCHANGERS ADVANTAGES

Maxwor Plate Heat Exchanger is more compact in structure compared to other heat exchanger.
It can perform heat exchange under differential temperature of 1 °C with a designed pressure as high as 40Bar, capacity of 4500m3/h and connection size of DN25-DN500.
Maxwor PHEs come in wide range of size and capacities. Different plate patterns are available for various duties and performance specifications.
Maxwor PHEs provides convenience operating with the most suitable suppression depth.
All plates are formed by one-step molding technology so as to reduce the plate's physical stress, improve the plate's uniformity and prolong the plate's useful life.
Scientific distribution design of the plate can avoid scaling, dead spots, minimize dirtiness of the plate surface and increase the coefficient of heat transmission
The plate positioning system and single side flow design provide convenience for connection and maintenance.
Maxwor PHE’s can be made of different material, for example, stainless steel, titanium or other special alloy steel, are available to meet the requirements of various industries.
The plate is easy to be inspected and manually cleaned. It can be cleaned by back flushing under many circumstances. The daily cleaning is not time consuming and professionals are not required.
All plates use glue-free gasket so that there are less costs for operation and maintenance.
The heat exchanging can be designed in many types from two fluid media with single counter-current to three or more fluid media with multi current, through the changing of flow type or increasing the flow passages. Therefore more suitable solutions can be selected by designers to meet different technical requirements.
The best coefficient of heat transmission and pressure drop can be regulated and achieved by assembling the plates, thus the investment in equipment can be minimized.
It is economical. The initial investment and operational and maintenance costs are substantially reduced because of its high heat transmission coefficient, convenient installation and service.

USAGE AREAS

Iron and Steel Industry Milk And Beverage
Power Plants
Building Heating & Cooling
Petroleum & Petrochemicals
Food Industry
Shipbuilding & Marine Industry
Chemical Industry
Refrigeration Industry
Heat Recovery Systems
Evaporation & Condensation

SERVICE AND SPARE PARTS SERVICE

We provide Turkey's largest stock of plates and gaskets to all brand models exchanger having our company as Maxwor service and spare parts to speed.

Before your heat exchanger becomes unusable, maintenance services with low costs prevent large-scale malfunctions for the future, prolonging the product life by periodic maintenance, preventing material loss from prolonged downtime in case of malfunction, and preventing the loss of quality of the manufactured product.

USE OF HEAT EXCHANGERS IN FOOD AND HEALTH SECTOR

MCP series plate is designed in accordance with completely hygienic applications, taking into account maximum smoothness, minimum pollution and perfect homogeneous distribution. It can be used for long periods without the need for intermediate CIP. Maxwor, knows the importance of hygiene and offers plates developed with human health in mind above all.

FEATURES OF MAXWOR MCP SERIES FOOD HEAT EXCHANGERS

Complete Stainless Structure,
Gradual heating and cooling structure,
Homogeneous flow,
Surface roughness rate below 3.1RA,
Wide gap plate usage according to usage conditions,
Withstand temperature up to -15 / 180°C,
Long slide and stud designed with capacity increase in the future,
Maximum 25 Bar operating pressure,
It has the advantage of fast maintenance and easy assembly.

This post is also available in: Türkçe (Turkish)